| |
Rental Catalog
Spring 2006
2000 Series CamMate- 33 Foot lens height
-
$525 / day
-
Improved Remote Head and Slip Rings.
- Choice of Small base or Large Custom base with track wheels.
- Color Sony Monitor, batteries for the whole system are included.
- One to two hour set-up time.
- Pan, Tilt, Zoom, Focus, Iris, Beta Start, and Tally light . Triax and 4 coax circuits thru' slip-rings..
- This arm will put an ARRI 435 25 feet in the air and control P, T, F, S/S. Video cameras to 32 high.
- The Dutch head is a must if you plan to Rock and Roll
Travel Series - 20 Foot reach - packs in an SUV
- 4 Foot arm sections and small footprint save transportation and studio space
- The same electronic design as the 2000 series
- The Dutch Head works here, too
- Minumum overall length is about 7 feet; this is a 5 foot reach & 4.5 foot height
System III CamMate - 25 Foot Lens height.
- The Remote Head is updated to CamMate 2000 series motors and gears.
- 6 Foot arm sections. Jib is 25 feet reaching, 32 feet high.
- Color Sony Monitor, batteries for the whole system are included.
- Choice of Small base or Large (Western-type) base
- One to two hour set-up.
- Big hard road cases you can sleep in. Same budget on hotel rooms! Sleep back stage!
- Control for Video - Pan, Tilt, Zoom, Focus, Iris, Beta Start and Tally light.;
- Control for Film - Pan, Tilt, 12/24V Power and optional Wireless Focus and Camera Start. (below)
- Pan and Tilt wheels available as extra
Wireless Focus and Camera Start
- $150 / Day
- BarTech Focus Device & Heden MP28 Motor
- Camera Start, including cables for Arri III, 435, 16SR, Aaton XTR Pro, Minima, and MovieCam.
- A Must for 16mm and 35mm film cameras, requires iris rods and a gear track on the lens.
- Works well with the Pro 35 B4 / PL mount adapter for cine-like DOF
-
Pipe Dollies
- This is from the Old School, baby. For long and fast moves it can't be beat. Two Neoprene wheels per corner, eight in all.
-
34" X 52" platform with pushbars, also a smaller platform to adapt Fisher dollies to round track..More surface area on the track than skateboard wheels, easier to push!
-
Pipe track is made of 20-foot steel pipe across marine-ply cross-ties.
-
RUN with a 100 mm lens (35mm).
Car Rigs
- $65 per mount, per day
- Norm's Hostess Tray w/ Ball Level.
- 1-1/4 Speedrail Hood Mount, Roof Mount (for lights).
- Wireless iris control & camera start. (BarTech & Heden)
- Tiny monitors & batteries.
- Bring a polarizer, for cryin' out loud.
|
|
